Simple Ham Radio Antennas: A Multiband Loop Antenna, 80 meters through 10 meters. Post #326.

An excellent video guide to building, erecting, and maintaining a simple 80-10 meter loop antenna. Lynn (NG9D) covers the basics in a short, well-produced video that can be applied to many home situations. With careful attention to detail and choice of wire, the antenna is fairly stealthy--something of concern to many of us "penned in" by neighbors and nearby buildings. Lynn uses commonly available RG-58 and RG-59 for the feedline. If you can't find two tall supports, try designing the antenna as a delta loop. A tall tree limb or a telescoping fiberglass mast could serve as the apex of the loop. If space is a concern, you could build the loop for 40-10 meter coverage. If you're worried about high SWR on the coax, feed the loop in a bottom corner with 450-ohm ladder line. Run the ladder line to a balanced antenna tuner or to a 4:1 balun. Fifty-ohm coax would then run from the balun to your antenna transmatch (tuner) and onto your rig. Either way, the design outlined by NG9D is a good, basic antenna that will keep your log book full. Building antennas is half the fun of Amateur Radio. For the latest Amateur Radio news and events, please check out the blog sidebars. These news feeds are updated daily. You can follow our blog community with a free email subscription or by tapping into the blog RSS feed. Thanks for joining us today! Aloha es 73 de Russ (KH6JRM).